Sylvania LD427SSX owner manual  Still Mode,  Switching Each Input Mode, Switching Audio Mode

Español Français English

Still Mode

You can pause the image shown on the TV screen.

Press [PAUSE F] to pause the image shown on the TV screen.

Still

•The sound output will not be paused.

•If no signal is detected or protected signal is received during still mode, the image remains paused and the sound output will be muted.

•The still function will be released after 5 minutes.

To cancel still mode, press any button except [POWER].

Switching Each Input Mode

You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access external devices when they are connected to the unit.

Press [INPUT SELECT] or [CH K] repeatedly to cycle through the input modes.

Input Select

TV

Video1

Video2

Component

HDMI1

HDMI2

HDMI3

DTV/TV channel

Video1

or

Video2

Component

HDMI1 (or PC input)

HDMI2

HDMI3

•Pressing [CHL] reverses the direction of the input modes.

Switching Audio Mode							INTRODUCTION
This section describes how to switch the audio in the analog mode and how
to switch the audio language in the digital mode.
	TV
	Press [AUDIO] to display the currently selected						PREPARATION
	audio mode. While receiving an MTS broadcast,
	press repeatedly to cycle through the available audio
	channel.
				11
				SAP / STEREO
	When all audio are available						WATCHING
	SAP / STEREO					SAP / MONO
			SAP / STEREO				TV
	When stereo and monaural audio are available
	MONO / STEREO					MONO / STEREO
							OPTIONAL
	SAP / MONO					SAP / MONO
	When SAP and monaural audio are available
							SETTING
			MONO
	When only monaural audio is available
			(cannot be switched)
	MONO	OPERATING
			: Outputs mono-audio
	STEREO	: Outputs stereo-audio
	SAP	: Outputs second audio program
DTV							BLU-RAY
1 Press [AUDIO] to display the currently selected
							BLU-RAY
	language and the number of available languages.
				11-1			SETTING
					English 1/3
2 Press [AUDIO] repeatedly to cycle through the
							TROUBLESHOOTING
	available audio languages.
	• Available languages differ depending on the
	broadcast. “Other” is displayed when the audio
	language cannot be acquired, or the acquired
							INFORMATION
	• The information display will automatically disappear in a
	languages are other than English, Spanish or French.
	Note:
	• [AUDIO] does not control external audio devices.
	few seconds.

17

EN