SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter
1 Getting started
To install the network adapter, observe the following instructions.

Handling

To avoid damaging the network adapter:
• Switch off the computer and disconnect the power cord from the power outlet.
• Do not open the antistatic bag until yo u are ready to install the network adapter.
• We recommend to wear an antistatic wrist st rap when installing the network adapter.
• Remove the computer cover and conn ect the wrist straps (electrically conductive) to the
computer chassis.
• Do not connect the wrist strap to the grou nd terminal of the power supply. Faulty wiring
could make this terminal live and potentially lethal.
• Hold the antistatic packaging of the network adapte r against the bracket of an expansion
slot on your computer for at least two seconds.
This reduces the static charge in the packaging and in your body.
• Do not touch any circuits on the network ada pter or any of its port contacts.
• Do not place the network adapter on th e computer cover or any other metal surface.
• Do not allow anyone else to touch t he network adapter.
• Avoid unnecessary movement since th is can increase electrostatic charge.
• Never use force when working with the net work adapter or the PCI bus.
• If you need to place the network adapter somewhere after removing it from the antistatic
bag, make sure that you place it on the antistatic bag and on a level surfac e.

Safety Instructions

To avoid potential shock hazards:
• Do not carry out any installation, m aintenance or (re)configuration work during a thunder-
storm.
• Do not connect or disconnect an y power cables during a thunderstorm.
• For installation in a Hot Plug system, observe the safety instructions specific to this sys-
tem. Read the relevant documentation.
Electrical installations must comply with the safety regulations of th e country in which
they are operated.
For 1000Base-SX adapters observe the following:
The laser components on the network adapter are Class 1 lase r components. Class 1 lasers
are considered incapable of producing damaging radiation lev els during normal operation or
maintenance and is, therefore, determined to be eye safe.
Electrostatic discharge!
Electrostatic discharge may damage or destroy the network adapter.
Electrical current!
Electrical current from power, phone, and communications cables can be hazardous.
Laser light!
Laser light from fiber-optic transmission cables and components can damage you r eyes.