SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter
Windows 21
7. Select the tab DRIVER.
8. Click UPDATE DRIVER....
The window “Upgrade Device Driver Wizard“ is displayed.
9. Click NEXT.
In the same window, the menu “Install Hardware Device Drivers” is displayed.
10. Select the check box DISPLAY A LIST OF THE KNOWN DRIVERS FOR THIS DEVICE SO THAT I
CAN CHOOSE A SPECIFIC DRIVER.
11. Click NEXT.
The menu “Hardware Type“ is displayed.
12. Select NETWORK ADAPTER.
13. Click NEXT.
The menu “Select Network Adapter“ is displayed.
14. Select the adapter for which the driver is to be installed.
15. Click HAVE DISK...
The window “Install from Disk“ is displayed.
16. Type the path to the driver.
17. Click OK.
The menu “Select Network Adapter“ is displayed again.
18. Select the adapter for which the driver is to be installed.
19. Click NEXT.
The menu “Start Device Driver Installation“ is displayed.
20. To install the driver, click NEXT.
In case the driver does not have a Microsoft Digital Signature yet, the window “Digital
Signature Not Found” is displayed.
21. To continue the installation, click YES.
The window “Upgrade Device Driver Wizard“ is displayed.
The menu ”Completing the Upgrade Device Driver Wizard” is displaye d.
22. Click FINISH to complete the installation.
For more information, refer to the corresponding readme files.
Windows XP
SysKonnect offers an NDIS 5.1 32-bit Miniport driver for the SysKonnect SK-98x x family sup-
porting Windows XP.
Install the driver To install the driver, proceed as follows:
1. After you have installed the adapter in your computer, boot Windows XP (for details, see
chapter 2 "Installation of the Network Adapter").
Windows XP detects the SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter as “Ether-
net Controller” during the boot operation.
The window “Found New Hardware Wizard“ is displayed.
2. Select the check box INSTALL THE SOFTWARE AUTOMATICALLY (RECOMMENDED).
3. Click NEXT.
The menu “Please choose your search and installation options“ is displayed.
4. Select the check box SEARCH FOR THE BEST DRIVER IN THESE LOCATIONS.
5. Select the check box INCLUDE THIS LOCATION IN THE SEARCH.
6. Type the path to the driver.
7. Click NEXT.
i
If the driver for one SysKonnect SK-98xx adapter is updated, all SysKonnec t SK-98xx adapt-
ers installed in your system should be updated.