SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter
Novell NetWare 33
5. Type the path to the driver.
If you are installing from CD-ROM, the menu “Select an action” is displayed. Here, selec t
CONTINUE AND ACCESS THE CD-ROM.
The menu “Select a driver to install” is displayed.
6. Select the driver for your network adapter.
The message “Do you want to copy driver <driver name>.LAN?” is dis-
played.
7. To copy the driver to the server, select YES.
If an older version of a SysKonnect driver is installed on the system, the me ssages “Save
existing file SYS:SYSTEM\<driver name.LAN?” and “Save existing file
SYS:SYSTEM\<driver name>.LDI?” are displayed.
8. To continue, select the desired options (YES or NO).
The menu “Board SK-98NW_1 (Driver <driver name>) Actions” i s displayed.
9. Select SELECT MODIFY DRIVER PARAMETERS/PROTOCOLS.
10. Configure the protocols to be used.
11. Configure the parameters, e.g. “slot number”.
12. After the parameters have been configured, select SAVE PARAMETERS AND LOAD DRIVER.
The driver is loaded.
Once the driver has been installed, the adapter parameters or bindings c an be changed
in the autoexec.nfc file using the “Nwconfig” tool.
For more information, refer to the corresponding readme file.