SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter
Windows 19
Windows 98 Second Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-98x x family sup-
porting Windows 98 Second Edition (Windows 98SE). Thi s driver does not support
Windows NT 4.0 or below, Windows 2000, and Windows XP.
With PCI adapters, due to the plug & play facility of PCI, Windows 98 SE is able to find, iden-
tify, and configure an adapter automatically.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer, boot Windows 98 SE (for details
see chapter 2 "Installation of the Network Adapter").
Windows 98 SE detects the SysKonnect SK-98xx V2.0 Gigabit Ethernet adapter a s “PCI
Ethernet Controller” during the boot operation.
The window “Add New Hardware Wizard” is displayed.
2. Click NEXT.
The menu “What do you want Windows to do?” is displayed.
3. Select the check box SEARCH FOR THE BEST DRIVER FOR YOUR DEVICE (RECOMMEN DED).
4. Click NEXT.
5. Select the source (CD-ROM, floppy disk, hard disk) from which the driver is to be
installed.
6. Type the path to the driver, e.g. e:\SK-982x\Windows\Win98SE, where ”e” is the des-
ignation of the CD-ROM drive on your system.
7. Click NEXT.
The window “Location of driver” is displayed.
8. Click NEXT.
The menu “Windows has finished installing the software that your new ha rdware device
requires” is displayed.
9. Click FINISH.
10. Restart your system.
For more information, refer to the corresponding readme file.
Windows Millennium Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-98x x family sup-
porting Windows Millennium Edition (Windows Me). This driver does not suppor t
Windows NT 4.0 or below, Windows 2000, and Windows XP.
With PCI adapters, due to the plug & play facility of PCI, Windows Me is able to find, identify,
and configure an adapter automatically.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer, boot Windows Me (for details, see
chapter 2 "Installation of the Network Adapter").
Windows Me detects the SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter as “PCI
Ethernet Controller” during the boot operation.
2. Select the check box SPECIFY THE LOCATION OF THE DRIVER (ADVANCED).
3. Click NEXT.
4. Select the check box SEARCH FOR THE BEST DRIVER FOR YOUR DEVICE (RECOMMEN DED).
5. Select the source from which the driver is to be installed, e.g. REMOVAB LE MEDIA (Floppy,
CD-ROM).
6. Select the check box SPECIFY A LOCATION.