TacT Audio M/S - 2150 X Display Timeout OFF OFF ON, REMOTE CONTROL: ON OFF

CAUTIONCAUTION
30 T act Audio
DISPL menu
(Display)
REM menu
(Remote)
Display Timeout OFF
OFF ON
DISPL Menu
1 - Display Timeout selections.
2 - Active Display Timeout setting.
2
1
The display menu controls the display Time-Out feature. This option is used to
turn the front panel display ON or OFF. When this option is set to ON the front
panel timer will turn the front display off if the front panel has not been accessed for
more than 10 seconds. To wake the display, simply turn the wheel or push any but-
ton either the front panel or the remote control. When this option is set to OFF the
display will remain lit whenever the unit is on.
Use the LEFT and RIGHT buttons to highlight the desired option and select it by
pressing the ENTER button.
REMOTE CONTROL: ON
OFF
1 - Indicates that remote is ON.
2 - From this menu remote control can only be turned OFF
REM Menu
The remote menu allows for disabling the remote control. Once the remote control
is disabled the unit can only be controlled from the front panel. An alternate way to
enable or disable the remote control is to press the front panel “ANALOG” and
“DIGITAL” buttons simultaneously- this can be used to change the remote control
state without entering the REM menu.
Press ENTER button to disable remote control.
Remote control is automatically disabled when M/S-2150 X detects an incoming
RS232 signal.
1
2
Main Menu Options M/S-2150 X