CAUTIONCAUTION
54 T act Audio
To summarize:
•All preset s for Amp#1 are set to low-pass filter for lef t channel and to
high-pass for right channel. Left channel cutoff frequency (LF-Hz) is
set to 100 Hz and right channel cutoff frequency (HF-Hz) is set to 100
Hz.
•Amp#2 CRO presets are identical to Amp#1 CRO preset s.
NOTE: Af ter any parameter CRO p arameter in changed you must click on
SEND option to send that parameter to selected amplifier .
NOTE: In this configuration Amp#1 will process lef t audio channel only .
Amp#1 left output will output low-p ass filtered left audio channel and Amp#1
right output will output high-pass filtered lef t audio channel. Amp#2 will
process right audio channel only. Amp#2 lef t output will output low-pass
filtered right audio channel and Amp#2 right output will output high-p ass
filtered right audio channel.
After all setup s are configured Amp#1 and Amp#2 will produce lef t and right
output with the frequency response as shown in Fig 7. Note that these curve
represent real measurements and they are not result of computer simulation.
Crossover Package M/S-2150 X