6 Appendix
123
6.5 Appendix 5 Guidelines for setting up videoconferencing rooms
The following are a set of guidelines to consider when either building a videoconferencing
room, or using an existing room for videoconferencing.
Lighting:
Low Contrast desired for light
intensity. No dark spots.
Intensity @ table 800 - 1400 Lux
as measured with an Incident light
meter.
Block sunlight from entering room.
Seating Area (Table):
Should allow all participants to see
Monitors.
Should allow camera to “see” all
participants.
Non-shiny non-patterned
preferably light grey surface (if
table used).
Walls:
Color: Generally high contrast
color desired. Light blue is
commonly used.
Acoustically reflective surfaces
(such as glass or concrete) should
be covered with curtains or sound
treatment.
Audio:
Noise Floor preferred less than
44dBC.
Reverb Time 0,3 to 0,5 sec.
Ventilation:
Keep in mind Noise Floor.
Velocity = Noise. Therefore keep
velocity of air low.
Room:
Should be located away from
noise.
Should not have windows.
Doors should be located off
camera.
How to prepare a typical room for videoconferencing:
The diagram below shows a typical room designed to obtain the best results when using the
system.