TANDBERG 3000 MXP User Manual
44
VGA-formats supported on 'DVI-I in'. (VESA compliant)
SVGA 800X600 60,72,75,85 Hz
XGA 1024X768 60,70,75 Hz
SXGA 1280x1024 60Hz
3.11.4 PC Soft Presenter and VNC
(Optional feature)
PC SoftPresenter is used to display PC images on your system without using a VGA cable
(PC Presenter). The system and your PC must be connected to the same LAN. In addition,
VNC (Virtual Network Computing) server software must be installed on the PC. Free software
can be downloaded from http://www.realvnc.com. Install the software by running the
downloaded file.
How to configure the VNC Server software:
1. Select the following to setup VNC; Windows-Start\All Programs\Highlight
RealVNC\Hightlight VNC Server\Show User Properties
2. Select Accept Socket Connections.
3. Select Auto for Display Number. Display Number in the system must then have the
value 0.
4. Enter a password in the Password-field. This must correspond with the VNC Settings
on your system.
How to show PC using the PC Soft Presenter and VNC:
1. Start the VNC software on your PC.
2. To use VNC, you must configure VNC Settings. Open VNC Settings in the
Presentation Settings menu in Administrator Settings.
3. Fill in the IP address of your PC, Display Number and Password. See chapter 4.3.9
VNC Settings for more information.
4. Press Save.
5. When you now choose VNC as video source in the Presentation menu, you will see
your PC using VNC. VNC settings will go back to default when the system goes to
standby.