TANDBERG 3000 MXP User Manual
138
Call control Data Triggered: Uses TxData, RxData and clock signals only. Use Data
Triggered when no handshake signal is available.
Call control Leased Line: Is a non-dialing protocol and should be used when two systems
are connected in a point-to-point connection. Use Leased Line when the handshaking
signals DTR and CD are available.
Call control Manual: Should be used when no handshake signals are available, and the
external equipment requires a constantly connected line.
Call control RS366 Dialing: The only dialing protocol and would normally be used together
with network clocking RS449/V35 Compatible when the external system uses
RS2366 ports.
Call status: Comprehensive information about the call listing transmitted and received
audio/video/data information.
Camera tracking: Voice Activated Camera Positioning - the camera will automatically view
the current speaker.
Camera tracking mode: Voice Activated Camera Positioning - the camera will automatically
view the current speaker.
Chair control: Enables one participant to control the meeting by selecting which of the
conference participants that is to be broadcasted to the other participants.
Channel Hunting: Normally used in conjunction with PRI daisy-chaining with TANDBERG
units in the daisy-chain.
Channel status: Comprehensive information about the call progress listing the numbers
called, and if an error occurs a cause code is displayed.
CIF: Common Intermediate Format, 352x288 pixels
Closed Captioning: Text chat.
Codec: The Codec is the heart of the system. The main task for the Codec is the
compression of outgoing video, audio and data, the transmission of this information to
the far end, and the decompression of the incoming information.
Continous Presence: See Split Screen
Control Panel: The Control Panel is found in the main menu.
CSU: Channel Service Unit
D Daisy-chaining: Use of several cameras in a video conference.
Data mode: (Dataport) Provides a transparent data channel. The channel can be used for
many different purposes, such as file transfer, application sharing and more. This
mode requires a TANDBERG system at the far end.
Dataport: The system provides two standard RS 232 data ports to allow a computer to be
connected for data transfer and control purposes.
Dataport 1: Supports 3 different modes: Data mode, Control mode and Modem mode.
Dataport 2: Dedicated to the main camera and will not be available in standard configuration.
DES: Encryption. (Data Encryption Standard)
DHCP: Dynamic Host Configuration Protocol.
Diagnostics: Allows testing of individual system components and displays the current system
settings.
Digital ClarityTF: Participants enjoy presentations of exceptionally high quality resolution
video.