Using your radio for tuning into FM stations
Your radio supports an FM tuner with RDS, so you will be able to access standard FM stations from it.
1.You can access the radio’s FM tuner by pressing the ‘Mode’ button twice (pressing the button once will cause the radio to play audio from its auxiliary input). Pressing the ‘Mode’ button a third time will cause the radio to leave its FM tuner state and become and Internet radio again.
You can also access the FM tuner by selecting the ‘Tuner’ menu item from the radio’s main menu.
2.Whilst the radio is in its FM tuner state, it will display what FM frequency it is currently tuned into. Turning the rotary encoder clockwise will increase the FM frequency the radio is tuned into and turning it anticlockwise will decrease the frequency.
3.Press and hold down the SELECT button to allow the radio to search for working FM frequencies that it can detect. The radio will continue to scan through all its available FM frequencies until it finds one that is used by a working station.
4.To save an FM frequency to the radio’s memory, press and hold down a preset button in the same way that you would save an Internet station to a preset.
5.To access a saved FM frequency, simply press the preset button assigned to the saved frequency.
Changing the volume
Whilst a radio station is playing and is displayed on the radio’s screen, you can change the volume simply by turning the VOLUME knob. This button will be active at all times.
Returning to the menu while a station is playing
When the Internet radio is playing a radio station it will display the station’s name and bit rate. You can return to the radio’s menu section at any time by either pressing the SELECT button – which will take you to the ‘Stations’ menu - or the BACK button to return to the previous menu item.
15
