Tangent Audio Quattro MKII manual Connect to the wireless network

< My Home Network >

It is possible, and in some locations highly likely, that your radio will find more than one wireless access point, in which case you can choose which one you want to connect to. Turn the TUNE knob on the radio to see the ESSID for each access point the radio has found.

Step 3 - Connect to the wireless network

When the ESSID for the access point you want to connect to is displayed on the screen, press the SELECT button.

If your network is not configured to need an encryption code, the screen should say:

Connecting to

network

Then:

Network OK

If the screen displays either:

Enter WEP key

Or:

Enter WPA key

Then the network is using one of the encryption systems: Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA). You therefore need to enter the correct WEP or WPA code into the radio to get it to communicate with your network.

Only the person who set up the network in the first place knows this code; if that person is not you then you need to find out what it is.

After 3 seconds, the display goes into the code entry mode. To enter the code, use the TUNE knob to select each character of the code in turn, pressing the

11