Tangent Audio Quattro MKII manual Setting the clock

3.When you have chosen the programme you want to listen to, either it will just start playing, or the display may show a list of days for you to choose from - use the TUNE knob to set the day the programme was broadcast, then press the SELECT button.

4.After you have chosen the day, you may be able to choose the Start Time. Set the Start Time using the TUNE knob and press the SELECT button.

5.Programmes which enable you to choose the time also enable you to fast-forward and rewind to the part you want while the radio is playing. When you press the 1 / PREV or 3 / NEXT button, the elapsed time that the programme has been playing is displayed. You can now turn the TUNE knob to change this time. You can also use the 1 / PREV or 3 / NEXT buttons to adjust the time. When you press the SELECT button again, the programme will play from that point.

6.Once the Internet radio is playing a programme that allows you to choose its start time, the radio’s preset buttons become playback- control buttons for the stream; e.g. you can press 2 / PLAY at any time to pause the stream, and then press PLAY to resume playing.

Setting the clock

1.Press the SELECT button. (Note: if you make a mistake at any point, press the BACK button to go back to the previous screen.)

2.Turn the TUNE knob until the display says <Configure>.

< Configure >

3.Press the SELECT button.

4.Turn the TUNE knob until the display says <Clock setup>.

< Clock Setup >

5.Turn the TUNE knob until the display says <Clock Format>.

< Clock format >

6.Press the SELECT button. Choose between 24 hour format and 12 (AM/PM) format. Confirm your selection by pressing the SELECT button.

Clock Format

24 12

7.Turn the TUNE knob until the display says <Set Time>.

17