Rechargeable Wireless Notebook Mouse
Charging the Batteries
For best results, you should charge the mouse at least 8 hours before using it. You can do this via the supplied USB charge cable. To do this:
1Connect the cable’s USB connector into an available USB port on your computer
2 Connect the other end to the mouse.
NOTE: TO CONTINUOUSLY CHARGE THE MOUSE VIA THE USB CHARGE CABLE, YOUR COMPUTER MUST BE ON AND AWAKE. FOR BEST RESULTS, TURN OFF YOUR COMPUTER’S POWER MANAGEMENT FEATURE WHILE CHARGING THE MOUSE.
Establishing a Communica- tions Link
The mouse has 256 identification codes that allow the mouse and its receiver to operate without interference from other radio frequency devices.
After your computer detects the USB receiver and the driver is installed, you must establish a communications link between the mouse and its receiver BEFORE you can use the mouse. To establish this link, you need to set the identification code so that the mouse works properly. To do this, follow the instructions below:
Make sure that your computer is turned on and has detected the USB receiver before you establish a communications link.
9
