Tascam DA-38 l

SECTION 4 : RECORDING

(2) Copying Tracks of One DA-38 to Tracks of Another

AS EUI example, M’s copy track 2 of first unit to track 1 of second unit

9 8 275

. Hook up a &vo DA-38 sync system. If necessary, refer to Section 7.

l Be sure to connect the units by using the optional PW-

88D dubbing cable.

WARNING

Each time you press the A key, the rightmost display

will change in sequence, like this (” I” for input, and

“k ” for track) :

1 Press the DIGITAL IN switch on the second unit The

indicator DIGITAL IN will light on the display.

@4w

l -iyc

2 Press SHIPT on the second unit. The associated LED

will start blinking to show that all the double function

keys are switched to offer their lower blue-labelled

functions.

l

3 Press the TRK COPY key on the second unit. The

display will read “b r.c F

o f F “.

4 Press the A or the 7 key on the second unit to change the. “off ” display to “on “,

5 Press the REC FJUNCTION switch for track 1 on the

second unit. The associated LED will start blinking

and the display will change to look like this :

6 Select input 2 by means of the A and V keys. (Remember, tracks of the first unit are ‘inputs’ to the

second unit.)

The 7 key genera& them in reverse order.

l If you hold the A or the V key and press the other, the display is switched back to show the default

source selection c’ t /” in our example).

7 Press SHIFT on the second onit to exit the track copy

seuing mode. The SHIPT LED will mm off and the

display will be switched back to show the ABS time.

8 Hold RECORD and press PLAY on the second unit

9 Press PLAY on the first unit

Track 2 of the first onit is copied to track 1 of the

second unit.

l You can also copy tracks of a DA-38 to other tracks of the sane unit (discussed in the previous para- graph) while at the same time making a digital copy

be&w, two DA-38s.

T&get Track