SECTION 8 : CONTROLLING THE DA-38 FROM MENUS
At this me”” yo” can select a TDIF input bit length
among three options : 16, ‘20, and 24, as discussed
later in this section of the manual, Factory preset is
8, \h ,a,
This is for switching the dithering function on or off,
as discussed in Section 4. Factory preset is % F F I’,
At this me”” yo” can see the rate at which a” error
occurs in the digital data. The function is factory
preset to “0 F F ‘I. See Section IO for a” explanation.
f-- 8-2. Using the 8uWin Dscillator
The DA-38 has a digital tone oscillator that produces a
440 Hz, sine wave tone.
(1) Accessing the Oscillator Menu
32 1 Press SHIFT and the associated LED will start blink-
ing to show that all the double function keys we
switched to offer their lower bhwlabelled functions.
2 Press MENU as many times as necessary to access
the oscillator me”” which looks like ‘GS r,
off “.
3 Press either the A or the V key to change the L F F ”
to “0 ?l ‘1.
4 Press SHIFT and the associated LED will turn off, the display being switched back to show the ABS time.
0 Obviously, to switch the oscillator off, change the
“0 n ” display back to “0 f f ” in step 3 above by
pressing either the A or the V key,
NOTES
l The built-in oscillator cannot be switched on if the
track copy function is turned o” at the ‘F r.~ F”
nx”“.
w When the built-in osci//atcr is switched on, the DA-
38 overrides whatever signa/ is plugged into the
input.
(2) To Monitor the Sine Wave Tone I
l The built-in oscillator must be switched on at the
“~S~““le”“,
1 Press the REC FUNCTION switches that correspond
to the channels you wa”t to monitor. The associated
LED will start blinking and the sine wave to”e from the oscillator is sent out of the outputs.
0 When the ALL INPUT key is pressed on, the sine wave tone from the oscillator is sent out of all the
eight outputs.
l To switch the oscillator off, press either the A or
the V key to change the “0 n ” display to “0 F F ”
when yo” we at the “0 5 c ” me”“.