Tascam DA-38 rKl

(3) Auto Input monitor

This causes the inputs whose corresponding tracks are When you rotate the SHUTTLE knob for reel rocking to

record enabled to be sent directly to the same numbered locate specific points on the tape, what you hear depends

outputs whenever the transport goes into any other modes on whether the shuttle monitor mode is activated or not, as

than play. shown in the table below.

f Press INSERT and the associated LED will light

solidly to show that the auto input mode is entered.

NOTES

As discussed above, if fhe DA-38 is not remote

controlled, the INSERT key switches on or off not

only the auto input monitor functfon but a/so the

inser? monitor function.

l When the /NSERT LED is /it:

Both the insert and the auto input monitor modes

are activated.

l When the INSERT LED is turned off :

Both the inserl and the auto input monitor func-

tions ara disabled.

hf you ara using fhe optional RC-848 remote control

unit, you can switch the insert and the auto input

monitor functions on/off separate/y

I NOTE

The shuttle monitor is not available unless both the

insert and the auto input monitor modes are acti-

vated.

To activate or disable the shuttle monitor function :

1 Press SHIFT and the associated LED will start blink-

ing to show that all the double function keys are

switched to offer their lower bhelabelled functions.

2 Press MENU as many times as necessary to access a

shuttle monitor menu which looks like “5 t L.G OFF ‘I.

3 Press either the A or the V key to change the W F ”

to ” ul-4 ‘1.

4 Press SHIFT and the associated LED will turn off, the

display being switched back to show the ABS time.

l To disable the shuttle monitor mode, press either

the A or the 7 key at the shuttle monitor menu

to change the “0 n I1 display to W F Ia.

Tascam DA-38 owner manual rKl