1 – Starting out with your DP-02/DP-02CF

Rear panel

WUSB jack

A USB cable is connected to a computer which allows import or export of files between the unit and the computer (see “Using the USB connection” on page 42).

NOTE

When the unit is connected to a PC using this jack, the FAT partition on the recording media is the only recognizable device.

EDC IN jack

The supplied AC adapter (PS-1225L) is connected here.

RDIGITAL OUT (OPTICAL) jack

The stereo mixed signals are output in S/PDIF format.

TMIDI OUT jack

MIDI signals such as MIDI Clock, MIDI Time Code, and Song Position Pointer are output here.

YLINE OUT (L,R) (RCA) jacks

The analog signals mixed in stereo are output.

USTEREO MIX jack

The signals input through this 1/8” stereo mini jack are mixed in stereo and output from the LINE OUTPUT or

PHONES jacks.

ISEND jack (1/4 phone )

The EFFECT SEND signal is output.

ORETURN (1/4 phone) jack

The stereo signal output from the external effector is inputted through this jack.

PINPUT A / INPUT B (XLR) jack

These XLR connectors are balanced analog inputs.

When PHANTOM is on, these connectors are supplied with 48 V phantom power.

AINPUT A/INPUT B (1/4” phone) jack

These 1/4” connectors are unbalanced analog inputs.

The INPUT A jack can be connected to a guitar direc- tory.

SGUITAR, MIC / LINE switch

Set to GUITAR or MIC / LINE to select which type of input signal is connected to the INPUT A jack.

Side panel (DP-02CF only)

D

DCompactFlash card slot (on the DP-02CF)

Insert a CF card into this slot.

After inserting the card, make sure the door is closed. With the door opened, the DP-02CF will not operate.

20 TASCAM DP-02/DP-02CF