Tascam DP-02, DP-02CF Pop-upMassages

4 – DP-02 Appendix

Pop-up Massages

The following shows a list of the popup messages. On the DP-02, popup messages are displayed according to the situation. Refer to this list to learn the details of each of the messages and how to remedy the trouble.

Blank CD Insert	“A blank CD has been inserted. Insert a CD-RW that is not blank”
CD-RW	An erased CD-RW or unwritten CD-R has been inserted in the CD-RW ERASE menu.
	There is no need to erase the inserted CD.
Blank CD Insert	“A blank CD has been inserted. Insert a non-finalized CD.”
Opened CD	An erased CD-RW or unwritten CD-R has been inserted in the FINALIZE menu.
	Insert the CD to be finalized.
Empty Export	“There are no exportable tracks”
Track	No audio data is recorded to tracks 1 to 8 in the CD EXPORT menu.
Finalized CD Insert	“A finalized CD has been inserted. Insert a CD-RW that is not blank.”
CD-RW	A finalized CD-R has been inserted in the CD-RW ERASE menu.
	Only CD-RW disks can be erased.
Finalized CD Insert	“A finalized CD has been inserted. Insert a non-finalized CD.”
Opened CD	A finalized CD has been inserted in the finalize menu.
	This CD does not need to be finalized.
Import File Not	“The import file cannot be found. Insert the import CD.”
Found	There is no import file in the inserted CD in the CD IMPORT menu.
	Insert a CD written with import data.
Import File Too	“The import file is too big.”
Big	The size of the file to import equals or exceeds the free space on hard disk when executing an
	import in the CD IMPORT menu.
	Create more free space on hard disk by DEL/UNUSED, for example, to ensure sufficient free space
	for reading the import file.
Invalid CD Insert	“An invalid CD has been inserted. Insert the backup CD.”
Backup CD	A CD not written with backup data has been inserted in the CD RESTORE menu.
	Insert a CD written with backup data.
Invalid CD Insert	“An invalid CD has been inserted. Insert a blank CD.”
Blank CD	A CD other than a blank CD has been inserted when writing to CD by the MASTER, WRITE, CD
	BACKUP or CD EXPORT menu. (This is also displayed when a finalized CD has been inserted when
	writing by Track at Once.)
	Insert a blank CD.
Invalid CD Insert	“An invalid CD has been inserted. Insert a CD-RW.”
CD-RW	A CD-R or other CD that cannot be erased has been inserted in the CD-RW ERASE menu.
	Insert a CD-RW to be erased.
Invalid CD Insert	“An invalid CD has been inserted. Insert the import CD.”
Import CD	An audio CD, blank CD or other invalid CD has been inserted in the CD IMPORT menu.
	Insert a CD written with import data.
Invalid CD Insert	“An invalid CD has been inserted. Insert a non-finalized CD.”
Opened CD	A CD that cannot be finalized has been inserted in the finalize menu.
	Insert a CD to be finalized.
Low Capacity	“A CD with low capacity has been inserted. Insert a blank CD with adequate capacity.”
Insert Blank CD	The capacity of the CD was less than the data to be written when an attempt was made to make
	two or more CDs having the same content after ending MASTER WRITE (Disc at Once) to CD, CD
	BACKUP or CD EXPORT. (This message is displayed, for example, when writing is executed with
	the CD capacity at 700 MB and the data capacity at 700 MB at the initial write, and a 650 MB CD is
	inserted after “Another CD?” is displayed after writing ends.)
	Insert a blank CD having adequate capacity.
No disk Insert	“A CD has not been inserted. Insert the backup CD.”
Backup CD	There is no CD in the CD tray in the CD RESTORE menu.
	Insert a CD written with backup data.
No disk Insert	“A CD has not been inserted. Insert a blank CD.”
Blank CD	• There is no CD in the CD tray when writing to a CD in the MASTER WRITE or CD EXPORT menus.
	• The CD tray was opened after preparation for backup was completed in the CD BACKUP menu.
	Insert a blank CD.
	Insert a blank CD.

TASCAM DP-02/DP-02CF 73