Punch recording
When you have rehearsed your punch-in, you can start recording.
1.Press the RHSL key so that the indicator goes out (but the AUTO PUNCH indicator is still lit).
2.Press PLAY (¥) so that playback starts. Use the pre-roll time to get ready to record.
At the punch-in point, the unit goes into record mode (the RECORD (–) indicator lights).
At the punch-out point, recording stops (the RECORD (–) indicator goes out), and playback continues until the post- roll point and then returns to the pre-roll point. The AUTO PUNCH indicator is turned off (the track arming status stays the same).
If you want to re-record the punch, turn AUTO PUNCH back on before recording again.
Pre-roll and post-roll time
The pre-roll and post-roll times can be set to suit your style of playing.
1.Press MENU and scroll down to PREFERENCE and press the ¥ cursor or YES/ENTER key.
NOTE
The N.SUPPRESSOR setting os only available on the DP-02. The DP-02CF will not show this option.
2.Use the cursor keys to move the cursor to the Pre (pre-roll time) item, and use the DATA dial to set the value in seconds.
T I P
The pre-roll and post-roll times can be set between 1.0 seconds and 9.9 seconds in 0.1 second steps.
3.Use the cursor keys to move down to the Post (post- roll time) item and use the DATA dial to change the value.
4.Press NO/EXIT when you’re done, so that you can start using these settings.
