4 – DP-02 Appendix

Backing up and restoring songs

When you back up a song, you’re backing up the audio tracks, as well as any editing, etc. Reverse the process (a CD to FAT partition to DP-02 disk) when you want to restore a song.

Backing up songs to CD

Back up your songs to a data CD so that you can restore them later.

1.Insert a CD-R that has not been written or an erased CD-RW into the slot.

2.Press the CD key to bring up the CDmenu and select the CD BACKUPaction.

3.The song list is displayed when entered.

Select the songs to back up using the DATA dial or cursor (§/) keys and the YES/ENTER key.

4.The screen displays the name of the file to write to the data CD.

Name the songs using up to eight letters by the cursor (˙/¥) keys or the DATA dial. (“Titling” on page 11)

5.Press the YES/ENTER key. The following confirma- tion screen is displayed.

6.Press the YES/ENTER key again. The songs are saved, and the number of CDs required for the backup is displayed.

When you have prepared the required number of CDs, press the YES/ENTER key to begin backing up.

7.After backup to the first CD ends, a message prompting you to insert the second CD is displayed.

8.Insert a blank CD, or NO/EXIT to cancel.

If you insert a written CD-RW instead of a blank CD:

The following message is displayed.

If you press the YES/ENTER key, the CD-RW will be erased and the backup continues.

If you do not want to erase the CD-RW, press NO/EXIT. If you hold the SHIFT key while pressing NO/EXIT, the unit will eject your CD-RW so that you can insert a blank CD.

TASCAM DP-02/DP-02CF 71