1 – Starting out with your
Loading a saved song
Of course, saving songs is no use unless you can load them again. This is how you do it.
1.Press the SONG key and use the DATA dial or cursor (§/¶) keys to highlight the LOADmenu item.
2.Press the YES/ENTER or ¥ cursor key.
3.Use the DATA dial or cursor (§/¶) keys to select the song to load and press YES/ENTER.
If the *symbol appears next to the song, then that song is currently loaded.
The current song is saved, and the selected song is loaded.
Erasing a song(s)
CAUTION
Erase a song only if you are certain you don’t need it any
T I P
You can also use this method to perform other opera- tions, such as copying.
If your disk is getting full, or you really don’t need a song any more, you can erase it.
Repeat steps 2 and 3 for multiple selection.
When you want to cancel the selection, rotate the DATA dial countercolckwise on the song highlighted.
The 
mark on the box disappears.
T I P
1.From the SONGmenu, select the ERASEaction:
2.Select a song that you want to erase using the cursor (§/¶) keys or DATA dial.
3.When decided, rotate the DATA dial clockwise to
confirm the song to erase. The 
mark appears on the check box.
An arrow (up or down) appears to the right of the highlighted song. A
4.Press YES/ENTER. You are asked if you want to erase the song (Are you sure?).
5.Press YES/ENTER to erase the song, or NO/EXIT to cancel the operation.
If you erase the current song, the first song in the list is automatically loaded.
You can erase all the songs shown, and a new song is automatically created. There is always at least one song on the partition (for more information about partitions, see “Disk/ CF card management” on page 38).
22 TASCAM