Tascam IF-FW/DM owner manual Introduction, Features, System Requirements, Trademarks

Introduction

Features

The IF-FW/DM provides the following inter- facing between your TASCAM mixer and a host computer via FireWire:

•24 channels of Input to the mixer from the computer at 44.1k and 48k sample rates

•24 channels of Output from the mixer to the computer at 44.1k and 48k sample rates

•1 MIDI port In and Out from the com- puter

System Requirements

Macintosh

•OS: MacOS X 10.3.5 or higher

•Computer: Apple Macintosh series with on-board FireWire

•Minimum: G4/800 MHz

•Recommended: Dual G4/1 GHz or higher

•Memory (RAM): 256MB or more

Windows

•OS: Microsoft® Windows® XP Home Edition or XP Professional with Service Pack 2

•Computer: Windows® XP Compatible PC equipped with an IEEE 1394/FireWire Port

•Minimum: Pentium®, Celeron®, or

Pentium® compatible processor 1.5 GHz or higher

•Recommended: Pentium® IV/2 GHz or higher

•Memory (RAM): 256MB or more

DM-3200 Requirements

The DM-3200 must be running software V1.20 or higher to use the IF-FW/DM. Please refer to www.tascam.com to obtain this update. Do not proceed to install the IF-FW/DM until your DM-3200 is running V1.20 or higher.

DM-24 Requirements

The DM-24 must be running V3.00 software to use the IF-FW/DM. Please refer to www. tascam.com or your local service center to obtain this update. Do not proceed to install the IF-FW/DM until your DM-24 is running V3.00 or higher.

Trademarks

Windows and Windows XP are trademarks of Microsoft Corporation.

Macintosh, MacOS, MacOS X and FireWire ™ are trademarks of Apple Computer.

All other trademarks are the property of their respective holders.

TASCAM IF-FW/DM Owner's Manual