Tascam MD-801RMKII owner manual About this manual, Backup memory, R3.12.2Laser pickup time

1 - About this manual

1.3.4 Backup memory

When the unit is powered down, the following set- tings are memorized.

•AUTO READY status (see [20])

•AUTO CUE settings and status (see [21])

•The last used PLAY mode (see [22])

•The two LOC points (A and B) (see [24])

•Pitch control settings and status (see [25])

•REPEAT status (see 4.2.9, "Repeat playback")

•Menu settings (see 3, "Menu items")

•If the resume function is turned on, the resume point is memorized

1.4 About this manual

This manual has been organized so that you should be able to find the section you need relatively quickly. We suggest that you familiarize yourself with at least the Table of Contents, so that you know where to look if you need information on a particular aspect of the unit’s operation.

An index is also provided, which should assist you in locating the desired section.

As mentioned earlier, when a section of this manual describes a function which is included as part of the MD-801R only, the section will be marked as below:

R3.12.2Laser pickup time

This indicates how long…

There are no features which are unique to the MD- 801P model only.

When characters are shown on the unit’s dot-matrix display, the following typeface is used: Input Mon. Alternatively, the alphanumeric display itself may be shown:

TITLE ?

If a “preset” word or phrase is shown on the display, this is shown as follows: TRACK TITLE .

Track times, program numbers, as shown in 7-digitnumbers, are shown as 034, etc.

If a front panel control or rear panel connection is mentioned, the following typeface is used (a little larger than that used for preset display words): TOC WRITE. The number of the control or connection, as given in 2, "Front and rear panel features", may also be given, e.g. [5].

If a front panel control or rear panel connection of another unit is specifically named, the folloiwng typeface is used: WORD IN.

When an optional PS/2-compatible keyboard is con- nected to the MD-801, the keyboard keys are repre- sented in the following typeface:

Press F1 to go back by one track.

If two keys are to be pressed together (i.e. the first- named key is to be pressed and held down while the second is pressed), this is represented as:

Press SHIFT + F1 to enter the erase track editing function.

• d

1–4TASCAM MD-801R/P Mk II