Tascam VL-A4/VL-A5, VL-A8/LF-S8 30-0NAMESAND FUNCTIONS

30-0NAMES AND FUNCTIONS

VL-A4 Rear Panel Front Panel

VL-A5 Rear Panel Front Panel

ENGLISH

VL-A8 Rear Panel Front Panel

1~ IN jack

This ~ IN jack is used to connect the supplied power cord.

2FUSE holder

This unit is equipped with a fuse. lf the unit does not work, disconnect the power plug from the AC outlet and then contact the nearest qualified service personnel.

3POWER switch

This is used to turn the power on and off.

4INPUT jack

This is a balanced input terminal that uses an XLR balanced cable and TRS PHONE balanced cable combination jack. This INPUT jack connects the unit to an external device.

8 TASCAM VL-A's

5LEVEL CONTROL knob

This is used to adjust the output volume.

6POWER indicator (Front Panel/Rear Panel)

This indicator lights up when the power switch is turned on and AC power is supplied to the ~ IN jack.

7HF CONT switch (VL-A5, VL-A8 only) This is used to adjust the treble level.

+1.5 dB 8k: Boosts the 8 kHz frequency by 1.5 dB.

+1.5 dB 3k: Boosts the 3 kHz frequency by 1.5 dB.

-1.5 dB 8k: Cuts the 8 kHz frequency by 1.5 dB.

-1.5 dB 3k: Cuts the 3 kHz frequency by 1.5 dB.

8LF CONT switch (VL-A5, VL-A8 only) This is used to adjust the bass level.

LF+: Boosts the 150 Hz or 800 Hz frequency by 1.5 dB.

LF-: Cuts the 150 Hz or 800 Hz frequency by 1.5 dB.

LF CUT: Cuts bass sounds at a frequency of 500 Hz or lower.