TATUNG TDR series Digital Recording System | Page | 24 |
|
|
|
3.8 Voice
This function button (as shown below) is used to setup the voice settings.
Note: To have a better voice play back quality. The image recording speed is better to set
to mote than 2 FPS.
Click on this button to setup the voice, the screen display as the below (Please follow the steps)
Audio Channel one
1.Check the box of “sound”
Check on this box to enable the sound recording.
2.Adjust the “Play Sound Delay”
Adjust this number to coordinate the synchronization of sound playback and video playback. The number 700 means the system coordinates the synchronization every 700 seconds. The faster the image recording speed, the smaller the delay time should be chosen. This means the two playbacks need to be coordinated more frequently. However, if the image recording speed is slow, we may choose longer time (large number) to coordinate the two playbacks.
3.Check on the box of the channel you want to activate
For
4.EXIT
You may click any other icon to exit Voice Setup Mode and go directly into other setup mode. Or click EXIT button to go back to Watch Mode.
