Tatung TDR-22XX operation manual Channel, Schedule, Speed, Color, Motion

TATUNG TDR series Digital Recording System Page 9

CHAPTER 3: SETUP MODE

The first screen of the setup mode will be the channel setting as the following picture

Note: For TDR-2209, CH 10 to CH 16 will be empty by the factory’s setting. For TDR-2204, CH 05 to CH 16 will be empty by factory’s setting

The control buttons contained in the main screen are described below:

1.Channel

Click on this button to setup the channel and channel name. There are two different ways to setup the channel-automatically scan and manually designate. You can also set the name for each channel.

2.Schedule

Click this button to setup the recording schedules. There are 16 recording groups and three recording modes (continuous, motion, sensor) can be separately set up for your application. Alarm output can also be set up separately.

3.Speed

Click to assign the recording speed and other options. The recording speeds include speeds on normal recording, motion recording, and sensor recording. You can also set up the times for display sequence, post alarm and post motion in this mode.

4.Color

Click to adjust the image color, including the adjustment of Brightness, Contrast, Color (saturation), and TINT for each individual channel.

5.Motion

Click to assign the motion function. You can set up each individual channel’s motion detection area (up to 10 zones for each channel), sensitivity, and the beep time for motion detection.