Taylor 104 Accessories

Model 104 O perator Parts Identification

110825

Accessories

Figure 3

ITEM DESCRIPTION PART NO.

1PAIL-6 QT 023348

2BRUSH-MIX PUMP BODY

3” X 7”023316

3BRUSH-REAR BEARING

1” X 2” 013071

ITEM DESCRIPTION PART NO.

4BRUSH-DRAW VALVE 1-1/2” 014753

5LUBRICANT-TAYLOR 4 OZ. 047518

6SANITIZER-STERA SHEEN SEE NOTE

*Note: A sample containerof sanitizer is sent with the

unit.For reorders, order Stera Sheen part no. 055492

(100 2 oz. packs)or Kay--5 part no. 041082 (200 packs).

Contents

Main Page Table of Contents Table of Contents -- Page 2 Section 1 To the Installer Installer Safety S Site Preparation Air Cooled Units Electrical Connections S 60 Cycle Units Beater Rotation Refrigerant Section 2 To the Operator Compressor Warranty Disclaimer Section 3 Safety S Section 4 Operator Parts Identification Model 104 Beater Door Assembly Accessories Section 5 Important: To The Operator Control Switch (Item 1) Orange Dial Light (Item 2) Safety Timer Control (Item 3) Door Hinge (Item 4) Reset Condition Section 6 Operating Procedures Assembly Page Page Sanitizing Priming Overrun Drawing Product Rinsing Cleaning Disassembly Brush Cleaning Page Section 7 Important: Operator Checklist During Cleaning and Sanitizing Troubleshooting Bacterial Count Regular Maintenance Checks Winter Storage Section 8 Troubleshooting Guide PROBLEM PROBABLE CAUSE REMEDY PAG E REF. Section 9 Parts Replacement Schedule Section 10 Warranty Explanation Section 11 Parts List