30 Models H62 & H63Operating Procedures
DO NOT use a water jet to clean or r inse the
freezer. Failure to follow these instruct ions may result
in serious electrical shock.
Step 5
Return to the freezer with a small amount of sanitizing
solution. Dip the end brush into the sanitizing solution
andbr ush clean the door spout and bottom of the draw
valve.
Note: To assure sanitary conditions are maintained,
brush clean each item for a total of 60 seconds,
repeatedly dipping the brush in sanitizing solution.
Step 6
Rinse a single service towel in sanitizing s olution and
wipe down the freezer door and area around the
bottom of the freezer door.
Step 7
Install the front drip tray and splash shield.
Figure 30
Step 8
Press the AUTO key to resume normal operation.
When the unit cycles off, product is ready to serve.
Figure 31
Manual Brush CleaningTHIS PROCEDURE MUST BE PERFORMED
EVERY 14 DAYS.
ALWAYSFOLLOW LOCAL HEALTH CODES.
To disassemble your unit, the following items will be
needed:
STwo cleaning pails
SNecessary brushes (provided with freezer)
SCleaning solution
SSingle service towels