Manuals / Brands / Kitchen Appliance / Blender / Taylor / Kitchen Appliance / Blender

Taylor shake/slush freezer Indicator Light - Mix Out (Item 4), Indicator Light - Add Mix (Item 5), Viscosity Adjustment (Item 6)

1 42

Download 42 pages, 1.15 Mb

12

Important: Tothe Operator Model432

Indicator Light - “Mix Out” (Item 4)

A mix out indicating light is located on the front of the

machine. When the light isf lashing, it indicates that the

hopper is empty and the mix supply needs

replenishing. To prevent damage to the unit,

refrigeration discontinues automatically when the mix

outindicat or lights illuminates. Refrigeration will restart

30 seconds after the mix supply is replenished.

Indicator Light - “Add Mix” (Item 5)

A mix level indicating light is located on the front ofthe

machine. When the light isf lashing, it indicates that the

mix hopper has a low supply of product and should be

refilled as soon as possible.

Viscosity Adjustment (Item 6)

The viscosity (thickness) of the slush can be adjusted

by turning the viscosity adjustment screw located

under the control channel. Turn the viscosity

adjustment screw clockwise for a t hicker product, or

counterclockwise for a thinner product. After mak ing

an adjustment, allowt herefrigeration system to cycle

2 or 3 times to accurately evaluate the viscosity.

Contents

Main Page Table of Contents Table of Contents - Page 2 Section 1 To the Installer Installer Safety S Site Preparation Air Cooled Units Electrical Connections S Beater Rotation Refrigerant Section 2 To the Operator Compressor Warrant y Disclaimer Section 3 Safety S 7 Model 432 Operator Parts Identification Section 4 Operator Parts Identification Model 432 Figure 1 Page 9 Model 432 Operator Parts Identification Beater Door Assembly Parts Identification Accessories Section 5 Important: To the Operator Control Switch (Item 1) Push- Button Switch (Item 2) Display Light Switch (Item 3) Indicator Light - Mix Out (Item 4) Indicator Light - Add Mix (Item 5) Viscosity Adjustment (Item 6) Section 6 Operating Procedures Assembly Page Page Page Sanitizing Priming Closing Procedure S S S S Draining Product From The Freezing Cylinder Rinsing Cleaning Disassembly Brush Cleaning Section 7 Important: Operator Checklist During Cleaning and Sanitizing: Troubleshooting Bacterial Count: Regular Maintenance Checks: Winter Storage Section 8 Troubleshooting Guide PROBLEM PROBABLE CAUSE REMEDY PA GE REF. Section 9 Parts Replacement Schedule Section 10 Limited Warranty on Equipment TaylorCompany Section 11 Limited Warranty on Parts Page TaylorCompany Section 12 Parts List CLASS REMARKS PARTS NUMBER QTY. WARR. DESCRIPTION PART Model 432 Parts List Page Page Page Page 052145-27 STATE COMPONENTS. SEE TABLE 1 TABLE 1 (REQUIRES OPTIONAL DOOR SWITCH) NO 052145-33 STATE COMPONENTS. FIG. 1 (REQUIRES OPTIONAL DOOR SWITCH) NO J2 PINS 5&6 4-DAY LOCKOUT ENABLE-INSTALL JUMPER TO ENABLE. 052145-40 STATE COMPONENTS. TABLE 1 (REQUIRES OPTIONAL DOOR SWITCH) NO J2 PINS 5&6 4-DAY LOCKOUT ENABLE-INSTALL JUMPER TO ENABLE.