TC electronic SDN BHD D22 user manual Appendix Technical specifications

Due continuous development these specifications are subject to change without notice.

APPENDIX - Technical specifications

Digital Inputs and Outputs

Connectors:

Formats:

Output Dither:

Word Clock Input:

Sample Rates:

Processing Delay:

Frequency Response DIO:

Sample Rate Conversion

Type:

Dynamic Range: THD+N:

Input Rate Range:

Analog Inputs Connectors: Impedance: Max. Input Level:

Min Input Level (for 0 dBFS): A to D Conversion:

A to D Delay: Dynamic Range: THD:

Frequency Response: Crosstalk:

Analog Outputs Connectors: By-pass: Impedance:

Max. Output Level:

Full Scale Output Range: D to A Conversion:

D to A Delay: Dynamic Range: THD:

Frequency Response: Crosstalk:

EMC Complies with:

Safety Certified to:

Environment Operating Temperature: Storage Temperature: Humidity:

PCMCIA Interface Connector: Standards:

Card Format:

Control Interface

RS485:

GPI, Pedal, Fader:

General

Finish:

LCD:

Dimensions:

Weight: Mains Voltage: Power Consumption: Backup Battery Life: Warranty parts and labor:

XLR (AES/EBU), RCA Phono (S/PDIF)

AES/EBU (24 bit), S/PDIF(24 bit), EIAJ CP-340, IEC 958 HPF TPDF dither 8-24 bit

BNC, 75 Ohm, 0.6 to 10 Vpp 32 kHz, 44.1 kHz, 48 kHz 0.2 ms @ 48 kHz

DC to 23.9 kHz ± 0.01 dB @ 48 kHz

Asynchronous 120 dB

-106 dB 44.1 to 48 kHz @ 1 kHz, -2 dBFS 31 kHz to 49 kHz

XLR balanced (pin 2 hot)

20 kOhm (balanced)

+27 dBu (balanced) -4 dBu (balanced)

24 bit (1 bit, 128 times oversampling)

0.8 ms @ 48 kHz

>103 dB (unweighted), >106 dB(A)

-95 dB (0.0018 %) @ 1 kHz, -6 dBFS (FS @ +18 dBu) 10 Hz to 20 kHz: +0/-0.2 dB

<-80 dB, 10 Hz to 20 kHz, typical -100 dB @ 1 kHz

XLR balanced (pin 2 hot) Through relay

40 Ohm (balanced)

+26 dBu (balanced)

-4 dBu to +26 dBu (balanced)

24 bit (1 bit, 128 times oversampling)

0.57 ms @ 48 kHz

>100 dB (unweighted), >104 dB(A)

-86 dB (0.005 %) @ 1 kHz, -6 dBFS (FS @ +18 dBu) 10 Hz to 20 kHz: +0/-0.5 dB

<-60 dB, 10 Hz to 20 kHz, typical -90 dB @ 1 kHz

EN 55103-1 and EN 55103-2, FCC part 15 class B, CISPR 22 class B

IEC 65, EN 60065, UL 1419 and CSA E65

32° F to 122° F (0° C to 50° C)

-22° F to 167° F (-30° C to 70° C) Max. 90% non-condensing

PC Card, 68 pin type 1 cards

PCMCIA 2.0, JEIDA 4.0

Supports up to 2 MB SRAM

5 Pin DIN

¼ inch phone jack

Anodized aluminum face and top plate. Plated and painted steel chassis 56 x 128 dot graphic LCD-display

19" x 1.75" x 8.2" (483 x 44 x 208 mm)

5.2 lb. (2.35 kg)

100 to 240 VAC, 50 to 60 Hz (auto-select) <20 W

>10 years 1 year

22