![](/images/new-backgrounds/1263887/26388725x1.webp)
E N G L I S H
SETUP PAGE
By clicking on the Setup tab in the control panel, you will be able to perform some advanced tweaks to your PowerCore system.
SYSTEM INFORMATION
The System information indicates the current PowerCore software, drivers and Control Panel versions.
Check for update
By pressing the CHECK FOR UPDATE button the software will automatically access the internet and check to see if a newer version is available for download. Before downloading you will be prompted and asked to confirm the download.
System Report
If for some reason you need to get in contact with our support center they will ask to see a system report. The system report is a small
SYSTEM SETUP - plug-in loading
The System Setup options controls the way the
Adjust for least host CPU consumption
Chose this setting if you experience clicks or dropouts.
High compatibility mode
This is the default setting and it will work perfectly for most setups.
Adjust for most
This is the ideal setting if you use many small and low CPU consuming
SYSTEM SETUP - Buffer Multiplier
If you experience host CPU spikes you may need to increase the PowerCore’s buffer size. The buffer multiplier increases your soundcards buffer setting by a factor 1,2,3 or 4. Increasing the buffer multiplier results in increased latency and should therefore only be increased if CPU spikes actually occur.
E N G L I S H
22 / POWERCORE | POWERCORE / 23 |