Technicolor - Thomson XRB3059-A Listening to your system Playing other sources

Listening to your system

Playing other sources

1Turn on the power of the playback component.

2Turn on the power of the receiver.

3Select the source you want to playback.

Use the input select buttons.1

4Start playback of the component you selected in step 1.

Choosing the input signal

• Default setting: AUTO

You need to hook up a component to both analog and digital inputs on the rear of the

receiver to select between input signals.2

•Press SIGNAL SEL (SIGNAL SELECT) to select the input signal corresponding to the source component.

Each press cycles through the options as follows:

•AUTO – This is the default setting. The receiver selects the first available signal in the following order: DIGITAL; ANALOG.

•ANALOG – Selects an analog signal.

•DIGITAL – Selects an optical or coaxial digital signal.

When set to DIGITAL or AUTO, 2 DIGITAL lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input.

Selecting the multichannel analog inputs

If you have connected a decoder or a DVD player with multichannel analog outputs to this receiver (page 14), you must select the analog

multichannel inputs for surround sound. 3

1Make sure you have set the playback source to the proper output setting.

For example, you might need to set your DVD player to output multichannel analog audio.

2Press DVD.

3Press SIGNAL SEL (SIGNAL SELECT) to select the multichannel analog inputs. DVD 5.1ch shows in the display and the ANALOG indicator lights.

06

English Deutsch Français Italiano Nederlands Español

Note

1If your source is the TV’s built-in tuner, switch to the channel you want to watch, otherwise make sure that the TV’s video input is set to this receiver (For example, if you connected this receiver to the VIDEO jacks on your TV, make sure that the VIDEO input is selected). Turn down the volume of your TV so that all the sound is coming from the speakers connected to this receiver.

2• This receiver can only play back Dolby Digital, PCM (32 kHz to 96 kHz), DTS and WMA9 Pro digital signal formats. With other digital signal formats, set to ANALOG.

•You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital connections (Connecting other audio components on page 15) and set the signal input to DIGITAL.

•Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.

3• During playback from the multichannel inputs, you can’t use any of the sound features/modes and only the volume and channel levels can be set.

•You can’t listen to your speaker B (Second Zone) system during playback from the multichannel inputs.

33

En