Technicolor - Thomson XRB3059-A operating instructions Dual Mono Setup, LFE Attenuator Setup

13Other Settings

Dual Mono Setup

•Default setting: CH1

You can specify how dual mono encoded Dolby Digital and DTS soundtracks should be played. Dual mono is not widely used, but is sometimes necessary when two languages need to be sent to separate channels.

1Select ‘Dual Mono Setup’ from the Other Setup menu.

6.Other Setup			6b.Dual Mono	Setup
	a.DRC	Setup
	b.Dual	Mono Setup	Dual Mono
	c.LFE	ATT Setup			[ CH1
	d.SR+	Setup
		:Return			:Finish

2Choose the setting that you want.

•CH2 – Only channel 2 is played

•CH1 CH2 – Both channels are played through the front speakers

•CH1 – Only channel 1 is played

3When you're finished, press RETURN. You return to the Other Setup menu.

LFE Attenuator Setup

• Default setting: ATT 0 dB

Some Dolby Digital and DTS audio sources include ultra-low bass tones. Set the LFE atten- uator as necessary to prevent the ultra-low bass tones from distorting the sound from the speakers.

1Select ‘LFE ATT Setup’ from the Other Setup menu.

6.Other Setup			6c. LFE ATT	Setup
	a.DRC	Setup
	b.Dual	Mono Setup	LFE ATT
	c.LFE	ATT Setup			ATT 0dB
	d.SR+	Setup
		:Return			:Finish

2Choose the setting that you want.

•ATT 0dB – No limiting (recommended)

•ATT 10dB – 10 dB of limiting

•LFE ** – No sound from LFE channel

60

3When you're finished, press RETURN. You return to the Other Setup menu.

SR+ Setup for Pioneer plasma displays

Make the following settings if you have connected a Pioneer plasma display to this receiver using an SR+ cable. Note that the number of settings available will depend on the plasma display you’ve connected.

See also Using this receiver with a Pioneer plasma display on page 56.

1 Select ‘SR+ Setup’ from the Other Setup menu.

6.Other Setup			6d.SR+ Setup
	a.DRC	Setup	PDP Volume	Control
	b.Dual	Mono Setup			OFF
	c.LFE	ATT Setup	PDP Input Select
	d.SR+	Setup	DVD/LD		[ input-1 ]
			TV/SAT		[ input-2 ]
			DVR		[ input-3 ]
			VIDEO	[		TV	]
			Monitor Out	Connect
				[		OFF	]
		:Return				:Finish

2Select the ‘PDP Volume Control’ setting you want.

•OFF – The receiver does not control the volume of the plasma display

•ON – When the receiver is switched to one of the inputs that use the plasma display (DVD/LD, or another function below), the volume on the plasma display is muted so only sound from the receiver is heard.

3Assign any input source connected to the plasma display to the corresponding input number.

This matches the receiver’s input source with a numbered video input on the plasma display. For example, assign DVD/LD to input-2if you have connected your DVD video output to video input 2 on the plasma display.

•The Monitor Out Connect should be set to the input that you’ve used to connect this receiver to your plasma display.

6d.SR+ Setup				6d.SR+ Setup
PDP Volume	Control			PDP Volume	Control
	[ ON ]				[ ON ]
PDP Input Select				PDP Input Select
DVD/LD		input-1		DVD/LD		input-2
TV/SAT	[	input-2	]	TV/SAT	[	OFF	]
DVR	[ input-3 ]			DVR	[ input-3 ]
VIDEO	[	TV	]	VIDEO	[	TV	]
Monitor Out	Connect			Monitor Out	Connect
	[	OFF	]		[	OFF	]
		:Finish				:Finish

4When you're finished, press RETURN. You return to the Other Setup menu.

En