Confirming preset codes, Input | Technicolor - Thomson XRB3059-A

11Controlling the rest of your system

1While pressing the RECEIVER button, press the SETUP button.

The remote LCD display shows SETUP.

2 Use	to select DIRECT F then press
ENTER.

3Press the MULTI CONTROL button for the component you want to control then press

ENTER.

The LCD on the remote displays the component you want to control.

4 Use to switch direct function ON or OFF then press ENTER.

The LCD shows OK to confirm the setting.

5Press and hold RECEIVER for about two seconds to exit the SETUP.

Confirming preset codes

Use this feature to check which preset code is assigned to a MULTI CONTROL button.

1While pressing the RECEIVER button, press the SETUP button.

The remote LCD display shows SETUP.

2 Use	to select READ ID then press
ENTER.

3Press the MULTI CONTROL button of the component for which you want to check the preset code then press ENTER.

The brand name and preset code appears in the display for three seconds.

Controls for TVs

This remote control can control components after entering the proper codes or teaching the receiver the commands (see Operating other Pioneer components on page 48 for more on this). Use the MULTI CONTROL buttons to select the component.

•The TV CONTROL buttons on the remote control are dedicated to control the TV assigned to the TV CTRL button. If you have two TVs, assign the main TV to the TV CTRL button.

Button(s)	Function	Components
TV	Switches the DTV on or off.	DTV

	Switches the TV or CATV between standby and on.	Cable TV/Satellite TV/TV

INPUT	Switches the TV input. (Not possib	TV
SELECT	le with all models.)

TV CH +/–	Selects channels.	Cable TV/Satellite TV/TV/
		DTV

TV VOL +/– Adjust the TV volume.		Cable TV/Satellite TV/TV/
		DTV

SOURCE	Press to switch the component assigned to the TV CTRL	Cable TV/Satellite TV/TV/
	button on or off.	DTV

	Switches the DTV on or off.	DTV

	Press to get information on DTV programs.	DTV

	Use to choose the BLUE commands on a DTV menu.	DTV

50

En

Image 50

Technicolor - Thomson XRB3059-A operating instructions Confirming preset codes, Controls for TVs, Input, Select

Contents

VSX-816-S/-K Important the Moulded Plug Risk of Electric Shock Do not Open Operating Environment Voltage selectorVentilation Caution Contents Controlling the rest of your System Other SettingsMaking recordings Other connections Before you start Introduction to home theater Minute guideMinute guide Chapter Listening to Surround Sound 02 5 minute guide Using the Quick Setup Switch on the receiver and your TV Quick surround sound setupQuick surround sound setup Chapter Quick surround sound setup Enter Other problems when using the Auto Mcacc Setup Making cable connections Connecting upConnecting up Chapter DVD player Connecting up Connecting a DVD player and TVUse a coaxial digital audio cable for the connection.1 Audio and Video inputs on this receiver.2 Connecting upConnecting the multichannel analog outputs Use an optical cable for the connection.4 Use an optical cable to make this connection Connecting up Connecting other audio componentsAbout the WMA9 Pro decoder Connecting other video components Use a coaxial digital audio cable for the connection.3 Component 1 DVD Component 2 TV Component 3 DVR Using the component video jacksConnecting to the front panel video Terminal To improve FM reception Connecting up Connecting antennasUsing external antennas To improve AM reception Surround speakers Connecting up Connecting the speakersThis receiver Powered Hints on speaker placement Fig. a You can also refer to the 3-D speaker setup illustration on Overhead view of speaker setupView of 7.1 channel speaker setup Front panel Controls and displaysControls and displays Chapter ST/DIRECT/AUTO Surr Controls and displays Display Direct DigitalVIR.SB Auto Surr Multi Control buttons Controls and displays Remote controlReceiver Number buttons and other receiver Component controls Component control buttons 5TUNE/ST +/- /ENTERTV Control buttons Operating range of remote control Auto playback Listening to your systemListening to your system Chapter Listening in surround sound Press ‘ADV.SURR’ repeatedly to select a listening mode Using the Advanced surround effectsSetting the effect options Listening to your system Listening in stereo Listening with Acoustic Calibration EQ Using Virtual Surround Back VSB Using the tone controls Using Midnight and LoudnessUsing the Sound Retriever Enhancing dialog Use the input select buttons.1 Choosing the input signalListening to your system Playing other sources Start playback of the component you selected in step USB playback Chapter Using the USB interfaceUSB playback Basic playback controls Other compatibility information USB playbackCompressed audio compatibility About MPEG-4 AAC Surround back speaker setting System Setup menuSystem Setup menu Chapter Select the setting you want to adjust Select the surround back speaker setting System Setup menuManual Mcacc speaker setup Select ‘Manual MCACC’ from the System Setup menu Fine Channel Level Select ‘Fine Ch Level’ from the Manual Mcacc setup menuSelect ‘Fine SP Distance’ from the Manual Mcacc setup menu Fine Speaker Distance Wait for the EQ Auto Setting to finish Setting the Acoustic Calibration EQ automaticallySelect ‘EQ Auto Setting’ from the Manual Mcacc setup menu Acoustic Calibration EQ Select ‘EQ Data Copy’ from the Manual Mcacc setup menu Copying your Acoustic Calibration EQ settingsSetting the Acoustic Calibration EQ manually Select ‘OK’ to copy and confirm Manual speaker setup Checking your Acoustic Calibration EQ settings Speaker Setting Manual SP Setup menu Crossover Network Default setting 100HzSelect ‘Crossover Network’ from the Manual SP Setup menu Channel Level Speaker Distance Tuning directly to a station Using the tunerUsing the tuner Chapter Listening to the radio Listening to station presets Using the tuner Saving station presetsNaming station presets Changing the frequency step Making an audio or a video recording Making recordingsMaking recordings Chapter Controlling the rest of your system Chapter Setting the remote to control other componentsControlling the rest of your system Operating other Pioneer components Direct function Erasing all of the remote control presetsControlling the rest of your system Input Confirming preset codesControls for TVs Select Return AudioGuide Disc REC Stop RECSHIFT+ Subtitle Enter GuideCH + + CH Other connections Second Zone speaker B setupSwitching the speaker system Other connections Chapter Bi-amping your front speakers Bi-wiring your speakersOther connections Connecting additional amplifiers Using this receiver with a Pioneer plasma display DVD player Satellite receiver, etc Using the SR+ mode with a Pioneer plasma displayPioneer plasma Front panel display shows SR+ on or OFF Input Assign menu Other SettingsOther Settings Chapter Assigning the digital inputs Dynamic Range Control Setup Other SettingsOther Setup menu SR+ Setup for Pioneer plasma displays Dual Mono SetupLFE Attenuator Setup Additional information Chapter TroubleshootingAdditional information Additional information Large or Small is Changing the TV format setting Resetting the main unitSwitching the speaker impedance Press Setup to confirm Additional information Specifications Miscellaneous Power cord cautionCleaning the unit Furnished Parts Pioneer Corporation