Technicolor - Thomson XRB3059-A operating instructions Making recordings Chapter

Making recordings

Chapter 10:

Making recordings

10

English

Making an audio or a video recording

You can make an audio or a video recording from the built-in tuner, or from an audio or video source connected to the receiver (such as a CD player or TV).

Keep in mind you can’t make a digital recording from an analog source or vice-versa, so make sure the components you are recording to/from are hooked up in the same way (see Connecting up on page 12 for more on connections).

If you want to record a video source, you also need to use the same type of connection for the source as for the recorder. For example, you can’t record a component hooked up to S-video jacks with a recorder hooked up to the composite video outputs (see page 16 for more on video connections).

TV VOL INPUT TV CH VOL

SELECT

RECEIVER	SELECT		SOURCE
	INPUT
			DTV ON/OFF	REC	DTV INFO
						MUTE
AUDIO/VIDEO PRE-PROGRAMMED			MPX		REC STOP	JUKEBOX
REMOTE CONTROL UNIT
			AUDIO	SUBTITLE	HDD	DVD
			DISP		CH	CH
			STANDARD	ADV.SURR	STEREO	AUTO SURR
	TV	DVR	DIALOG E S.RETRIEVER ACOUSTIC EQ SIGNAL SEL
DVD			TV CTRL
	CD-R/TAPE	USB	SHIFT	EFFECT/CHSEL
CD	FM	AM	RECEIVER

2Select the input signal (if necessary). Press SIGNAL SEL to select the input signal corresponding to the source component (see page 33 for more on this).

3Prepare the source you want to record. Tune to the radio station, load the CD, video, DVD etc.

4Prepare the recorder.

Insert a blank tape, MD, video etc. into the recording device and set the recording levels.

Refer to the instructions that came with the recorder if you are unsure how to do this. Most video recorders set the audio recording level automatically—check the component’s instruction manual if you’re unsure.

5Start recording, then start playback of the source component.1

Deutsch Français Italiano Nederlands Español

SLEEP SB h ANALOG

1Select the source you want to record. Use the MULTI CONTROL buttons (or INPUT SELECT).

Note

1• The receiver's volume, balance, tone (bass, treble, loudness), and surround effects have no effect on the recorded signal.

•Some digital sources are copy-protected, and can only be recorded in analog.

•Some video sources are copy-protected. These cannot be recorded.

47

En