08The System Setup menu
Fine Channel Level
• Default setting: 0dB (all channels)
You can achieve better surround sound by properly adjusting the overall balance of your speaker system. The following setting can help you make detailed adjustments that you may not achieve using the Manual speaker setup on page 41.
1Select ‘Fine Ch Level’ from the Manual MCACC setup menu.
You’ll hear test tones from each speaker in turn. Since the left speaker is the main reference speaker, the level is fixed.
| 3.Manual | MCACC |
|
|
|
|
| 3a.Fine Channel Level | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
| a.Fine | Ch | Level |
|
|
|
|
|
|
|
|
| b.Fine SP | Distance |
|
|
|
| Please Wait... 20 | |||
|
| c.EQ | AUTO Setting |
|
| ||||||
|
| d.EQ | Data | Copy |
|
|
|
|
| Caution! | |
|
| e.EQ | CUSTOM1 | Adjust |
|
| |||||
|
| f .EQ | CUSTOM2 | Adjust |
|
| Loud test tones | ||||
|
| g.EQ | Data | Check |
|
| will be output. | ||||
|
|
|
|
| :Return |
|
| :Cancel | |||
|
|
|
|
|
|
|
|
|
|
|
|
Caution
•The test tones used in the System Setup are output at high volume (the volume increases to
2Select each channel in turn and adjust the levels (+/– 10 dB) as necessary.
Use to adjust the volume of the speaker you selected to match the reference speaker.
When it sounds like both tones are the same volume, press ENTER to confirm and continue to the next channel.
3a.Fine Channel Level
L+ 0.0dB (Reference)
R[ 0.0dB ]
C |
| + | 1.0dB |
|
LS | [ |
| ] | |
RS | [+ 10.0dB ] | |||
SBL | [– 10.0dB ] | |||
SBR | [+ | 9.5dB ] | ||
SW | [– | 1.5dB ] | ||
:Finish
•For comparison purposes, the reference speaker will change depending on which speaker you select.
•If you want to go back and adjust a
channel, simply use | to select it. |
38
3When you're finished, press RETURN. You return to the Manual MCACC setup menu.
Fine Speaker Distance
• Default setting: 3.0 m (all channels)
For proper sound depth and separation with your system, it is necessary to add a slight bit of delay to some speakers so that all sounds will arrive at the listening position at the same time. The following setting can help you make detailed adjustments that you may not achieve using the Manual speaker setup below.
1Select ‘Fine SP Distance’ from the Manual MCACC setup menu.
The volume increases to the reference level.
3.Manual MCACC
a.Fine Ch Level b.Fine SP Distance c.EQ AUTO Setting d.EQ Data Copy e.EQ CUSTOM1 Adjust
f .EQ CUSTOM2 Adjust g.EQ Data Check
:Return
2Adjust the distance of the left channel from the listening position.
3b.Fine SP Distance
L(Reference)
3.0 m 
ENTER:Next :Cancel
After pressing ENTER, test tones will be output.
3Select each channel in turn and adjust the distance as necessary.
Use to adjust the delay of the speaker you selected to match the reference speaker. The delay is measured in terms of speaker distance from 0.1 to 9.0 meters.
3b.Fine SP Distance
L3.0 m (Reference)
R[ 1.8 m ]
C |
| 3.0 m |
|
LS | [ | 1.3 m | ] |
RS | [ 1.2 m ] | ||
SBL | [ 1.3 m ] | ||
SBR | [ 1.2 m ] | ||
SW | [ 2.4 m ] | ||
:Finish
En
