Technika LCD22-921 manual Switching the TV On/Off, Input Selection, Basic Operations

Switching the TV On/Off

To Switch the TV On

•Connect the power cord to the 220-240V AC, 50 Hz. Then the standby LED lights up.

•To switch on the TV from standby mode either:

•Press the “” button, P+ / P- or a numeric button on the remote control.

•Press the STANDBY button, -P/CHor P/CH+ button on the TV. The TV will then switch on.

Note: If you switch on your TV via PROGRAMME UP/DOWN buttons on the remote control or on the TV set, the programme that you were watching last will be reselected.

By either method the TV will switch on.

To Switch the TV Off

•Press the “” button on the remote control or press the STANDBY switch on the TV, so the TV will switch to standby mode.

•To power down the TV completely, unplug the power cord from the mains socket.

Note: When the TV is switched to standby mode, standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active.

Input Selection

Once you have connected external systems to your TV, you can switch to different input sources.

•Press SOURCE button on your remote control for directly changing sources.

or,

•Select “Source” option from the main menu by using “” or “” button. Use then “” or “” button to highlight an input and press “” button to select.

Note: You can mark desired source options by

pressing the OK button. Therefore, when SOURCE button is pressed, only the marked source options will be available (except for the TV source).

Basic Operations

You can operate your TV using both the remote control and onset buttons.

Operation with the Buttons on the TV

Volume Setting

•Press “” button to decrease volume or “” button to increase volume, so a volume level scale (slider) will be displayed on the screen.

Programme Selection

•Press “P/CH +” button to select the next programme or “P/CH -” button to select the previous programme.

Viewing Main Menu

•Press “”/“” buttons at the same time to view main menu. In the Main menu select sub- menu using “P/CH -” or “P/CH +” buttons and enter

the sub-menu using “” or “” buttons. To learn the usage of the menus, refer to the menu system sections.

AV Mode

•Press the “TV/AV” button in the control panel on the TV to switch between AV modes.

Operation with the Remote Control

•The remote control of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV.

•Functions of the menu system are described in the following sections.

Volume Setting

•Press V+ button to increase the volume. Press V- button to decrease the volume. A volume level scale (slider) will be displayed on the screen.

Programme Selection (Previous or Next Programme)

•Press “P -” button to select the previous programme.

•Press “P +” button to select the next programme.

Programme Selection (Direct Access)

•Press numeric buttons on the remote control to select programmes between 0 and 9. The TV will switch to the selected programme. To select programmes between 10 och 299 (for Digital TV) eller 10-199 (för analog), press the numeric buttons consecutively. The limit of the delay time is 3 seconds.

•Press directly the programme number to reselect single digit programmes.

English - 11 -

[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_ 10065841.indd 11 02.11.2009 15:00:09