TechniSat DIGIT MF4-S manual Country selection, Antenna configuration, DiSEqC, Position A/Option a

Once the installation assistant has been completed, the sorting of programmes in the Favourites list will be made in accordance with your selection.

>To accept the selection, confirm by pressing OK.

Country selection

>Use the arrow keys up/down to select the time zone corresponding to your country of residence. (Fig. 5-4)

The time will be set automatically depending on your selection.

>Confirm by pressing OK, to accept your selection, and proceed to the antenna configuration.

Antenna configuration

In this installation step you can adjust the setting of your digi- tal receiver to the configuration of your antenna.

>If you wish to accept the standard antenna setting, use the arrow keys up/down to mark the field Standard and confirm by pressing OK. (Fig. 5-5)In this case continue with the item “Updating Software”.

>If the configuration of your receiving installation does not correspond with the standard setting, mark the field Manual and confirm by pressing OK.

DiSEqC

>If you have DiSEqC components in your receiving istallation, mark the field Activate and confirm by pressing OK

(Fig. 5-6).(Additional information on DiSEqC can be found in Chapter 10, Technical Terms).

Position A/Option A

>Use the arrow keys up/down to mark the satellite you wish to receive at the DiSEqC setting Position A/Option A and confirm by pressing OK. (Fig. 5-7)

Position B/Option A

>Use the arrow keys up/down to mark the satellite you wish to receive at the DiSEqC setting Position B/Option A and confirm by pressing OK. (Fig. 5-8)

(Fig. 5-3)

(Fig. 5-4)

(Fig. 5-5)

(Fig. 5-6)

(Fig. 5-7)

13