(Fig.
|
|
|
|
VT Group | VT Block | ||
|
|
|
|
7.12 Sleep timer
>Press the Sleep Timer key once or repeatedly to set the
15 minutes to 2 hours.
When the selected time has elapsed, the receiver will switch automatically to Standby mode.
7.13 Video text
7.13.1 Using the video text decoder of your television set
Wherever it is broadcast, video text will be supplied to your television set. To operate the video text display, use the remote control of your television set. If you experience problems with your television set, such as overlapping of video text and picture content, you should set your digital receiver to FBAS mode (Point 6.3.4).
7.13.2 Using the internal video text decoder
As an alternative, you may use the integrated TOP video text decoder to display the information. With TOP video text all text pages are automatically divided into groups and blocks, which makes the video text more readable.
>Switch to the programme on which you wish to view video text information.
>Press the Videotext key to switch on the video text display. (Fig.
>Use the numeric keys to enter the video text page you wish to view. Your entry will be displayed in the top left hand corner of the screen. Once you have entered the desired video text page, the receiver will search for the appropriate page.
As not all video text pages can be transmitted simultaneously, it may take a few seconds for your receiver to find the correct page, and to display it on the television screen.
All video text providers use page 100 to show the index to contents.
>Use the red resp. green keys to page forward or backward one page at a time.
>Use the yellow function key to display the video text group shown in the yellow field.
>Use the blue function key to display the video text block shown in the blue field.
28
