> In the selection window that will now be displayed, use the
arrow keys up/down to select the desired source
(TV or Radio).
> Confirm by pressing OK.
Depending on the previous setting, either the TV or the radio
programme list will now be displayed.
> Now use the arrow keys to mark the desired programme.
> Use the arrow keys up/down to move the marker around
the list one line at a time.
> Use the arrow keys left/right to move around the list one
page at a time.
> Press the OK key to accept a programme into the timer
memory.
Date
> Use the arrow keys to mark the column Date.
> Use the numeric keys to enter the date (in 4-digit format)
on which the timer event is to take place.
Start
> Use the arrow keys to mark the column Start.
> In this line, use the numeric keys to enter the starting time
for the timer.
Stop
> Repeat the steps as for “Start”in order to enter the stopping,
or ending time (except in the case of programme change
timers).
Repeat
> Use the arrow keys to mark the column Rep.
> Confirm by pressing OK.
A selection window will be displayed, presenting various
repeat options.
1x Timer active once
TDaily repeat
1 W Repeat once per week
1-5 Repeat only on weekdays
6-7 Repeat only on weekends
> Use the arrow keys up/down to select the desired func-
tion.
> Press OK to accept the setting into memory.
Accepting data into memory
> When you have completed the programming, press the yel-
low function key Accept, to accept the data into memory.
36