8.5.1 Activate default setting
After this function is called up, the default factory programming will be implemented again, all own settings will be deleted, and the installation assistant AutoInstall will be started.
>Use the arrow keys up/down to mark the line Activate default setting.
>Confirm by pressing OK.
The message will be displayed: “Do you really want to activa- te the default setting?”.
>Use the arrow keys left/right to mark either Yes or
Abort.
>Confirm by pressing OK.
8.5.2 Delete all programmes
This function serves to delete the entire programme memory.
>Use the arrow keys up/down to mark the line Delete all programmes.
>Confirm by pressing OK.
The message will be displayed:“Do you really want to delete all programmes?”.
>Use the arrow keys left/right to select either Yes or
Abort.
>Confirm by pressing OK.
8.5.3 Updating the programme list (ISIPRO)
The ISIPRO programme updating feature allows you to keep the pro- gramme list of your receiver up to date automatically. To achieve this, a current programme list is broadcast at regular intervals via satellite (ASTRA 19,2°East), and can be downloaded by your receiver.
Should the parameters of the data channel used to download the programme list be changed, you can correct the parameters in this menu. The current transponder data may be obtained from your spe- cialist retailer. Generally you should not make any changes in this menu.
>Use the arrow keys up/down to select the line Update programme list.
>Press the OK key to go to the
>To ensure that your receiver will check automatically to see whether a new programme list is available, mark the line
Update.
>Switch the automatic programme list updating function On by pressing OK.
(Fig.
(Fig.
(Fig.
