TechniSat DIGIT MF4-S manual Position A/Option B, Position B/Option B, Updating Software

(Fig. 5-8)

(Fig. 5-9)

(Fig. 5-10)

(Fig. 5-11)

(Fig. 5-12)

Position A/Option B

>Use the arrow keys up/down to mark the satellite you wish to receive at the DiSEqC setting Position A/Option B and confirm by pressing OK. (Fig. 5-9)

Position B/Option B

>Use the arrow keys up/down to mark the satellite you wish to receive at the DiSEqC setting Position B/Option B and confirm by pressing OK. (Fig. 5-10)

In the next step, you should check on the correct configura- tion of your antenna.

>If you wish to accept the settings entered, use the arrow keys up/down to mark the field Yes, and confirm by pressing OK. (Fig. 5-11)

Updating Software

When you have completed the antenna settings, the digital receiver will check whether a new version of the operating software is available via satellite. In case new software is available, you can perform an automatic software update.

>Use the arrow keys left/right to select the field Update, and confirm by pressing OK.

(Fig. 5-12)The new software for your unit will now be downloaded. This procedure may take several minu- tes.

Searching for programmes / ISIPRO

When checking whether new software is available for the receiver, the system will also in addition check whether a new ISIPRO programme list is available. If a new programme list is available, this can be installed with the aid of the ISI- PRO function.

>Use the arrow keys up/down to mark the line

ISIPRO programme list update. (Fig. 5-13)

>Confirm by pressing OK.

The current programme list will now be downloaded via satellite. Please note any additional on-screen messages, as well as the explanation at Point 8.5.3.

If no new ISIPRO programme list is available, or if you do not wish to download this, please perform a programme scan in order to find new programmes.

14