TechniSat DIGIT MF4-S manual Now table with current programme contents, Next, More

information on the contents of various programmes.

In addition, you may use the SFI functions to select a particu- lar programme, to pre-select a programme, or to set a timer for a programme.

7.15.4 Now (table with current programme contents)

The first SFI table to be displayed is the “Now” table (Fig. 7-16)sho- wing the programmes currently broadcast. The yellow bar to the right of the programme name indicates the elapsed time of the current programme. The programme currently selected is marked.

>Use the arrow keys up/down to move the marker through the list one line at a time. To move the marker one page at a time, use the arrow keys left/right.

>The SFI functions (Point 7.14.3) are now available for use.

>Press the yellow function key to go to the SFI table “Next”

(see Point 7.15.5)

or

>Press the TV/Radio key to return to normal operation.

7.15.5 Next

>Use the yellow function key to call up the table "Next" (fol- lowing programmes). (Fig. 7-17)

>All the SFI function s are available (Point 7.15.3).

>Press the yellow function key to go to the SFI table “More”

(Point 7.15.6)

or

>Press either the green function key or the Back key to return to the previous SFI table “Now”

or

>Press the TV/Radio key to return to normal operation.

7.15.6 More

>Pressing the yellow function key again while the SFI table “Next” is displayed will take you to the SFI table “More”. (Fig. 7-18)

In thios table, an additional time window is shown in the title line. The time of the SFI table is displayed in this window.

>Press the yellow function key to page forward by the time period shown in the yellow coloured field.

(Fig. 7-17)

(Fig. 7-18)

31