TechniSat DIGIT MF4-S manual Manual scan, After the scan, Scan mode

Polarisation

>Use the arrow keys up/down to mark the line

Polarisation.

>In this line, use the OK key to enter the polarisation plane (horizontal or vertical), whichever is appropriate for the programme being scanned for.

Scan mode

>Use the arrow keys up/down to mark the line Scan mode.

>Use the OK key to decide whether you wish to search only for free-to-air programmes (Free) or whether you want to include encrypted programmes in the scan (All).

>Confirm by pressing the red function key Start scan. The scan will be started. Please note any messages display- ed on screen.

>You may abort the scan at any stage by pressing the red function key again.

8.4.4 Manual scan

If the automatic scan or the transponder scan is unable to locate a particular programme, it may be necessary to additionally enter pro- gramme-specific PID numbers for this programme. These numbers may be found in the Internet, or may have to be obtained from the relevant programme provider.

The menu (Fig. 8-18)differs from the menu Transponder scan only in the menu items PCR PID, Audio PID and Video PID. There is no need to enter the scan mode.

>Proceed as described for a transponder scan.

>In addition, use the arrow keys up/down to mark the lines PCR PID, Audio PID and Video PID,and enter the appropriate numbers using the numeric keys.

8.4.5 After the scan

While the scan is still in progress, you can follow the transponder scan on your screen. When the scan is completed, the number of transponders found, the number of programmes and of new pro- grammes found will be displayed. In addition a prompt will be displayed, (Fig. 8-19), asking whether you wish to accept the pro- grammes found automatically into the TV or Radio list. If you decide to accept the programmes automatically, you can also still decide whether these should be added to the Favourites list in sorted or unsorted order.

(Fig. 8-18)

(Fig. 8-19)

49