1103907432 DR5060 M1_105x148,5 25/04/14 16:00 Page4
DESCRIPTION
1.Voltage selector (120/230V)
2.Lint pad
3.Fabric brush
4.Steam control dial
Before use
Please read the instructions for use and Important Safeguards carefully.
•Remove any packaging from the appliance.
•Do not plug in or turn on until assembly is complete.
•Set the voltage to the correct position as advised hereafter.
•Remove the lint pad by pulling it to the bottom - fig.1.
It is normal for a small amount of smoke to be produced the first time the appliance is used. This will quickly disappear.
Dual voltage
The appliance can work on both, 120V or 230V, AC systems. Be sure the dual voltage selector is in the correct voltage position before plugging in. To do this, switch the selector which is above the handle to the right position - fig.2.
This is a 230V dual voltage appliance. An adapter plug may be necessary when using
5.Steam indicator / Steam button
6.Removable water tank
7.Storage hook
8.Electrical cord
appliance in the United States. If needed, plug the steambrush into correct adapter plug for the specific country and plug assembly into electrical outlet.
Warning! Never switch selector while unit is plugged in.
Filling with water
Warning ! Never use 100%, distilled or demineralised water as this can cause the appliance to spit and leak.
•Your steam brush has been designed to operate using untreated tap water. If your water is very hard (check with your local water authority) it is possible to mix tap water with
Important: Heat concentrates the elements contained in water during evaporation.
4
