Tefal P4424735 manual Drops fig

Problems	Recommendations
If your pressure	Have your pressure cooker checked by a TEFAL Appro-
cooker has been	ved Service Centre. Contact the Customer Relations
heated under pres-	Helpline.
sure without any
liquid in it:
If the pressure in-	This is normal during the first few minutes.
dicator has not	If this problem persists, check that:
risen and nothing	- The heat source is sufficiently high; if not, increase it.
is escaping	- The quantity of liquid in the pan is sufficient.
through the valve	- The operating valve is on	.
during cooking:	- The pressure cooker is properly closed.
	- The seal or the edge of the pan is not damaged.
	- The seal is correctly positioned in the lid, (refer to
	section “Cleaning and Maintenance”)
If the pressure	This is normal during the first few minutes.
indicator has risen	If the problem persists, place your pressure cooker in
and nothing is	a sink under cold running water from a tap until the
escaping through	pressure indicator drops - fig. 13.
the valve during	Clean the operating valve (A) - fig. 15 and the steam
cooking:	release outlet (C) - fig. 16 and check that the safety
	valve pin drops without difficulty - fig. 17.
If steam leaks	The correct closure of the lid.
from around the	The position of the lid seal.
lid, check:	The seal is correctly fitted in the lid.
	The cleanliness of the lid, the seal and its groove in the
	lid.
	The rim of the pan is in good condition and not dama-
	ged.
If you are unable	Check that the pressure indicator is in the lowered po-
to open the lid:	sition.
	Otherwise, place your pressure cooker in a sink under cold
	running water from a tap until the pressure indicator
	drops - fig. 13.
	Never interfere with the pressure indicator.
If the food is not	The cooking time.
cooked or is	The power of the heat source.
burned, check:	The correct position of the operating valve.
	The quantity of liquid.

EN

23