FuzzyLogic_NC00112494_Mise en page 127/03/12 08:47 Page11

•The screen displays default time of “01: 15” for “Soup” function, press “PRESET TIMER”, “▲”, “▼” key to enact timer and preset time.

•If there is no need for enactment, press “START” key to start “Soup” function, the prompt music will ring and the “START” lamp will remain on.

•At the end of the cooking, the prompt music will ring, the cooker will enter “KEEP WARM” status with the lamp on and the screen will display the holding time.

EN

ZH

TH

MS

“Steam” Function (for vegetables, fish, etc.) Measuring the ingredients

•The maximum quantity of water in the bowl should not exceed the maximum CUP mark shown in “CUP” on the bowl – Fig.9. Exceeding this level may cause overflow during use.

•The water level should be lower than the steam basket bottom.

Preparation

•Pour water into the bowl, never exceed the maximum CUP mark.

•Place the steam basket in the bowl – Fig.10.

•Add the ingredients in the steam basket.

To steam cook

•Press “MENU” and “▲” or “▼” key under standby mode and select “Steam” function, the function selection mark “▲” will point to “Steam” function.

•The screen displays default time of “00: 40” for “Steam” function, press “PRESET TIMER”, “▲”, “▼” key to enact timer and preset time.

•If there is no need for enactment, press “START” key to start “Steam” function, the prompt music will ring and the “Start” lamp will remain on.

•At the end of the cooking, the prompt music will ring, the cooker will enter “KEEP WARM” status with the lamp on and the screen will display the holding time.

“Reheat” Function

Repeat use of “reheating” in case of excessive rice or too little rice during cooking will result in burnt rice at the bottom.

• Do not use reheat function more than 1 jour after end of keep warm.

• Press “MENU” and “▲” or “▼” key under standby mode and select “Reheat” function, the function selection mark “▲” will

point to “Reheat” function.

11