Connection and pre-heating

Close the appliance.

Check that your electric installation is compatible with the power and the voltage indicated under the appliance.

Connect the appliance to a plug with an earth connection.

If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid any risk of danger.

Connect the cord into the wall socket : the red light comes on.

During first use, the appliance may give off a slight odour and smoke. This is normal.

Allow the appliance to pre-heat : the green light comes on when the correct cooking temperature is reached.

Do not touch the hot surfaces of the appliance : use the handles.

After use

Unplug the cord from the wall socket.

Leave the appliance to cool in an open position.

Clean the plates and the base of the appliance with a sponge and washing up liquid.

The plates can be put in the dishwasher. Do not use scouring pads or hard abrasive powder.

If you put them in the dishwasher, re-oil the plates occasionally to maintain the non-stick.

Never immerse the appliance and the cord in water.

Storage

The appliance can be stored vertically for space saving. Close the appliance and lock it with the locking clip. Wind up the cord into the cord storage area

English

TEFAL SA has an ongoing policy of research and development and may modify these products without prior notice.