Tektronix 1740A/1750A When markers are selected, When both voltage and timing cursors are selected

Using the Menus

HWhen timing cursors are selected (TIME), the left bezel control is used to adjust the horizontal position of the first timing cursor, and the center control adjusts the horizontal position of the second timing cursor. The right bezel control moves both cursors horizontally, in tandem. The readout ∆T shows the time difference (positive or negative) between the two cursor positions, up to four significant digits.

HWhen markers are selected (MARK), the left bezel control is used to adjust the horizontal position of the first marker line, the center bezel control adjusts the second marker, and right bezel control adjusts the third marker.

HWhen both voltage and timing cursors are selected (V+T), a control assignment appears on the screen. The bezel button is used to assign the control to voltage or timing cursors. The bezel controls work the same as for the individual timing and voltage cursor modes. Both voltage and timing readouts are present.

	∆ V
700 mV		WFM CURSOR
			VOLT
			TIME
			MARK
			V+T

VOLT1 VOLT2 TRACK

VERTPOS HORIZPOS

CLEAR

MENU

Left Center Right

Figure 3-3. The WAVEFORM CURSOR menu.

3-10 1740A/1750A Series Waveform/Vector Monitor User Manual